To be connected to the CAN drive bar inside the metal cabinets and equipped with a graphic colour touchscreen.
This device manages the control panel and co-ordinates the various function modules.
A single Previdia Max control panel can house 2 of these units (a main unit and a secondary unit as backup). Mounts to the frontplate and, if housed in the upper opening, connects to the CAN drive bar. If housed in the lower opening, it connects to the FPM module in the upper opening.
Provides the following connections
- Ethernet connection for networking and remote control.
- RS485 channel for repeaters (FPMCPU used as remote keypads- max. 14).
- RS485 channel for interfacing with Building Management Software, supports MODBUS RTU protocol.
- Mini USB Port for configuration via PC.
- RS232 Port for configuration via PC.
Order codes
FPMCPU main unit module
PRREP enclosure for mounting FPMCPU module as remote repeater
HARDWARE CHARACTERISTICS
- Double CPUs, a main CPU and a emergency backup that will take over in the event of fault on the main CPU.
- 7’’ touch screen, 65000 colours
- 6 status LEDs
- 6 LED and function buttons
- LED and button for multiple alarm management
- Scandinavian key to access level 2 (EN54 part 2)
- Ethernet port
- RS232 port
- Mini USB port
- RS485 port for the connection of up to 14 repeater panels
- RS485 port for ModBus RTU
- Connector for the connection to other frontplate module
- Housing for μSD card
TECHNICAL SPECIFICATIONS
- Customization of user interface, icons, buttons etc.
- Connection over RS485 or TCP/IP (if set as repeater)
- Possibility to operate in three different modes: main control panel unit, backup unit,
- remote repeater user-interface
- Event visualization filter
- Customization of event priority and visualization
- Power voltage: 19-30Vdc
- Consumption @ 27.6V: stand-by 120mA, max. 140mA
- Maximum current on RS485-REPEATER @ 27.6V 1A
- Maximum current on RS485-BMS @27.6V 1A
